中文版

ENGLISH

Illustration

Manufacture



Major Product

Structured packing

Regular fillerTOP

According to the structure of gas and liquid contact parts, towers are divided into two kinds: packed tower and plate tower. Packed tower is one of the most popularly gas-liquid mass transfer equipment. It has widely application in distillation, absorption, desorption and steam stripping , extraction , wash , heat exchange and chemical transform, etc. Regular filler is much more used in packed tower.

Material:

metal: carbon steel, 304, 304L, 316, 316L, 317, new anticorrosion material 15, etc.

Corrugated wire-mesh fillerTOP

Corrugated wire-mesh filler
● Characteristic:
  • ◇More theory plates, much more flow capacity, low pressure drop.
  • ◇Excellent performance at low loading, the number of theory plate increasing as loading descend and almost no limit of low loading.
  • ◇Operation Flexible.
  • ◇Scale effect invisible.
  • ◇Meet the requirements of the large high vacuum finestill unit, and can be applied to separate the difficult separating material system, the heat sensitive material system as well as the high purity material.
● Characteristic (SC=CY SB=BX):
Filler
type		 Material Peak height
mm		 Surface-to-volume ratio
m2/m3		 dh
mm 		Inclined angle
ω		 Porosity
ε%		 Factor
m/s		 Theory plate number
No/m		 Pressure drop
mmHg/m
SC Stainless steel 4.3 700 5 45° 87-90 1.3-2.4 6-9 5
SB 6.3 500 7.3 30° 95 2-2.4 4-5 1.5

Orifice corrugated fillerTOP

Orifice corrugated filler
● Characteristic:

The metal orifice corrugated filler is made of sheet metal. The sheet metal is first stretched and punched to specific form with diamond orifice, then is pressed to corrugated filler. This kind of filler integrates merit of the wire-mesh filler and that of the corrugated plate filler. It has advantage of light, low pressure-drop and high efficiency.

● Characteristic:
Filler
type		 Material Surface-to-volume ratio
m2/m3		 dh
mm 		Inclined angle
ω		 Porosity
ε%		 Factor
m/s		 Theory plate number
No/m		 Pressure drop
mmHg/m
Type 1 Stainless steel 643 5.7 45° 91.6 1.4-2.2 6-9 2-3.5
Type 2 450 9 30° 95.5 1.5 4-5 1.6-1.8

Corrugated orifice plate filler TOP

Corrugated orifice plate filler
Corrugated orifice plate filler characteristic:
Main
type		 Material Peak height
mm		 Surface-to-volume ratio
m2/m3		 dh
mm 		Inclined angle
ω		 Porosity
ε%		 Factor
m/s		 Theory plate number
No/m		 Pressure drop
mmHg/m
SM125 Stainless 24 125 31.5 45° 98.5 3 1-1.2 1.5
SM250 12 250 15.8 45° 97 2.6 2-3 1.5-2
SM350 8 350 12 45° 95 2 3.5-4 1.5
SM450 6.6 450 9 45° 93 1.5 3-4 1.8

Corrugated calender orifice plate filler:TOP

characteristic
● Characteristic:

Calender corrugated orifice plate filler is made of sheet metal in 0.1mm～0.12mm thickness, the sheet metal is punched and pressed to corrugated. Since there are a great quantity of holes in the filler, gas-liquid mixture stays on the filler's surface more time, gas and liquid exchanges much more sufficiently and the efficiency of separation is much more higher. The geometry size of this kind of filler is similar with that of the orifice plate filler. Its orifice diameter is from 0.4 to 0.5mm.It serves in fatandoil industry, fine chemistry as well as pharmaceutical industry.

● The geometry characteristic parameters:
Filler
type		 Material Theory plate number
No/m		 Peak height
mm		 Porosity
ε%		 Surface-to-volume ratio
m2/m3		 Pressure drop
mmHg/m 		Factor
m/s
700y Stainless steel 5-7 4.3 85 700 7 1.6
500y 3-4 6.3 90 500 2 2.1
250y 2.5-3 12 97 250 2.25 2.6